What to do if my Phasak UPS shows fault code 43 and the alarm is sounding?
If your Phasak UPS displays fault code 43, it means the UPS shut down automatically due to an overload at the output. Remove some of the connected devices from the UPS output and then restart the UPS.
What does it mean when my Phasak PH 9210 UPS shows fault code 14 and the alarm is sounding?
If your Phasak UPS is showing fault code 14, it indicates that the UPS shut down automatically because of a short circuit on the output. You should check the output wiring and the devices connected to see if any are causing a short circuit.
Transport the UPS system only in the original package to protect against shock and impact.
Ensure the UPS system is dry and acclimated to the environment before installation.
Connect UPS system to an earthed shockproof outlet using VDE-tested, CE-marked cables.
Avoid disconnecting the mains cable during operation and prevent fluids or foreign objects from entering the UPS.
Repairs must be carried out by qualified personnel due to hazardous voltages and battery risks.
Illustrates the rear panel layout and identifies various ports and connectors on different models.
Provides step-by-step instructions for connecting the UPS input and output, including terminal types.
Explains the functions of the ON/Mute, OFF/Enter, and Select buttons for UPS control.
Describes the indicators and information displayed on the UPS LCD panel.
Details the sounds and meanings of UPS alarms for different conditions.
Provides a list of abbreviations and their meanings displayed on the UPS LCD.
Guides through setting output voltage, frequency converter, and output frequency.
Explains the different UPS operating modes and their corresponding LCD displays.
Lists fault codes, icons, and warning indicators with their meanings.
General| Category | UPS |
|---|---|
| Input Voltage | 220/230/240 VAC |
| Output Voltage | 220/230/240 VAC |
| Output Waveform | Simulated Sine Wave |
| Battery Type | Sealed Lead Acid |
| Communication Interface | USB |
| Battery Voltage | 12V |
To Next Page
