Step 98
Now remove the canopy and carefully
mark the position of the tray.
Step 99
Use plenty of epoxy to attach the battery
tray to the base of the fuselage in this
position in the radio bay.
Step 100
Hold the battery in position while the epoxy
cures. The battery can now be removed for
charging by releasing the Velcro strap.
Step 101
The canopy is supplied factory trimmed and
ready to fit. Simply locate the rear ‘W’ latch
in its cutout in the rear of the canopy.
Step 102
Keeping the canopy pulled forward, slip the
front ‘W’ catch in the cutout in the front of
the canopy and allow it to snap into place.
Pushing the front canopy catch towards
the rear allows the canopy to be removed.
To Next Page
Loading...