SD1411
18
USING A USB DEVICE OR SD CARD
Loading a USB Device
USB devices can be played through the USB
connector on the front panel. To access files on
a USB device, insert the USB device as
indicated below:
After inserting an USB device containing MP3
or WMA files, “USB PLAY” appears on the
display and the unit will automatically scan the
card for music files and begin playback.
To eject the USB device, press the MODE
button (2) to select a different source. Pull the
USB device straight out and return the cover to
the closed position.
Loading an SD Card
To insert an SD card, you must first remove the
front panel to reveal the SD card slot (see
“Detaching the Front Panel” on page 9). Insert
your SD Card as illustrated below and then
reinstall the front panel.
After inserting an SD card containing MP3 or
WMA files, “SD Play” appears on the display
and the unit will automatically scan the card for
music files and begin playback.
To eject the SD card, remove the front panel
and then press in on the SD card to release it.
Pull the SD card straight and replace the front
panel.
Navigating Files
Please refer to “MP3/WMA Operation” on
page 14 for information regarding directory
navigation and file searching.
/
TUNE
SD1411 MP3/WMA RECEIVER
SCAN
MONO
EQ
AUX IN
MENU
(7)
RESET
To Next Page
Loading...
Need help?
General
