H 101
Getting Started
11
5 Technical data
l Single shot camera back for Hasselblad H 1
l Electrical computer interface between the H 101 and
The Hasselblad H 1
l Full support for H1 auto focus lenses
(1/4000 - 30 sec.)
l Electronic protections against double exposures
l Orientation sensor for correct display of landscape and
portrait images
Resolution: 3.992 x 2.656 pixels
Image modes: RGB, Grey or CMYK
Pixel depth: 3 x 8 bit or 3 x 16 bit for RGB
8 bit or 16 bit for Greyscale
4 x 8 bit or 4 x 16 bit for CMYK
Image area: 24.6 mm x 36.9 mm (1” x 1.5”)
Computer connection: IEEE 1394
Power consumption: 7 watt
Compatible strobe systems: When used on a H1 Camera
Body, please refer to the Has-
selblad documentation.
When used on a Phase One
FlexAdaptor, please refer to
the section “Strobe Equip-
ment” in the Capture One
User Guide
To Previous Page
Loading...