14
HOW TO CHARGE BATTERY:
Step 1: Plug the charger into a properly wired 120VAC outlet with a
minimum __ampere rating. A green LED light will display on the charger,
which means the battery is ready to be charged.
Step 2: Plug the charger into the charge port in the breastplate of the
scooter. Please be mindful of orientation.
Step 3: Once the charger is properly inserted into the charge port, the
LED light should turn from green to red. This indicates that the scooter is
charging.
NOTE: Charging is complete once the light on the charger turns from red
to green.
NOTE: If two 9amp chargers are plugged into the wall at the same time,
the breaker will pop.
To Next Page
Loading...