PHAT G3 - SCOOTER FEATURES GUIDE; LOCK AND UNLOCK; STARTUP AND ACCELERATION; GEAR AND REVERSE CONTROL

17
WWW.PHATSCOOTERS.COM
SCOOTER FEATURES GUIDE
Getting Started
LOCK:
When the scooter is OFF, press the Lock button on the key fob to arm the alarm
and lock the scooter.
UNLOCK:
When the scooter is OFF, press the Lock button on the key fob. This will activate the
scooter for 15 seconds, during which time the scooter can be freely rolled and the
push-to-start button becomes operable.
DISABLE ALARM:
To disable the alarm, press the lock button on the key fob.
START:
In order to initiate start-up, the scooter must be unlocked using the key fob.
Once the scooter is unlocked, use the push-to-start button on the scooter or the
Remote Start button on the key fob to turn the scooter ON.
Press the button again to turn the scooter OFF.
ACCELERATE:
Once the scooter is ON, twist the throttle towards the user to cause the bike to
accelerate.
CHANGE GEARS:
Push the top button to toggle through the gear selections. 1->2->3->1 and so on.