PHAT G3 - BATTERY TRAY ACCESS; OPENING THE BATTERY TRAY; CLOSING THE BATTERY TRAY

To Next Page

To Previous Page

WWW.PHATSCOOTERS.COM

BATTERY TRAY

OPEN BATTERY TRAY:

Step 1: Remove the security screw.

Step 2: Remove the locking handle.

Step 3: Pull the handle towards you.

Step 4: Battery tray will drop down.

Step 5: Fold out the trap door.

CLOSE BATTERY TRAY:

Step 1: Place the battery inside and ensure proper connections. Make sure all the

wires are safely installed and out of the way.

Step 2: Close the trap door.

Step 3: Push the battery tray up into the deck of the scooter. You should feel a click

of the locking mechanism.

Step 4: Reinstall the locking handle.

Step 5: Reinstall the security screw.