Model: D6
READ
ME FIRST
Quick Start Guide
Everything you need to know about setting up included
CHECKING THE COMPONENTS
1
POWER YOUR SYSTEM
4
Subwoofer x 1
Soundbar x 1
User manual x 1Remote control x 1 Quick Start Guide x 1Screws bagx 1
HDMI(ARC) cable x 1
3.5mm to RCA audio cable x 1
Quick
Start Guide
User manual
Mounting template x 1
Turning On
“Batteries not included for shipping safety. Two AAA batteries needed”
5
CHOOSE INPUT MODE
Select the soundbar input mode by pressing the TV ARC, AUX, OPT, and
BT mode button on the remote control
BT mode
AUX mode
TV ARC mode
OPT mode
Option 1 (Preferred) : HDMI ARC
Option 3 : AUX
Option 2 : OPTICAL
BLUETOOTH CONNECTION
TV CONNECTION
INPUT MODE INDICATORS
LED Indicators are located here
3
CONNECTING A TV
HDMI ARC PORT ONLY
OPTION 1 (Preferred) : HDMI ARC
If the TV has an ARC (Audio Return Channel)label
on one of its HDMIports, connect the HDMI cable to
your TV’s HDMI ARC jack and the soundbar’s
TV(ARC) jack.
HDMI connection is unavailable if your TV does not have a HDMI port labeled “ARC”
Connecting via HDMI(ARC) enable the following functions using the TV’s remote
control:
– Turn the power on and off
Both the TV and the sound bar turn on/off at the same time.
– Volume adjustment
The sound bar’s volume can be adjusted when the TV’s audio output is set to the
sound bar.
NOTE
Input mode on soundbar needs to match the connected external device (TV, Projector, Cable box, etc.) output mode.
Make sure LED light on soundbar matches TV connection method.
NOTE
6
CHANGE AUDIO SETTINGS ON YOUR TV
TV
1. Only Option 1: HDMI ARC connections needs to enable CEC
2. These are names different brands might use for HDMI-CEC: Samsung(Anynet+++), Vizio(CEC),
Sony(Bravia Sync), LG(SimpLink), Sharp(Aquos Link), Philips (EasyLink), Roku(1-Touch Play)
NOTE
2.Enable Consumer Electronics Control
(CEC)
on your TV
(Exclusive for Option 1: HDMI ARC connection)
Continued on back page
7
CONTROL YOUR SOUNDBAR
7a. Top panel
7b. Remote control
Long Press 3 Seconds---Power On/Off
Short Press 1 Second---Switch Input Source
Volume Down Volume Up
2
OPTION 3 : AUX
If the TV has no ARC label on its HDMI ports, connect
the 3.5mm to RCA audio cable to your TV’s AUDIO
OUT jack and the soundbar’s AUX jack.
Make sure that the cable ends match the color of the ports.
Some TV models have AUDIO IN jack only. it can’t deliver audio
signal to soundbar.
NOTE
OPTION 2 : OPTICAL
If the TV has no ARC label on its HDMI ports,
connect the optical cable to your TV’s OPTICAL
OUT jack and the soundbar’s OPTICAL jack.
If you hear audio coming from TV’s internal speaker, make sure TV
speaker off or min volume
NOTE
SOUNDBAR ASSEMBLE DETAILS
Wall brackets x 2
Adapter x 1
1. POWER
Turns on the Sound Bar or sets it to standby mode.
2. MUTE
Turns off the sound temporarily
3.TREB+
Increase treble level
4.TREB-
Decrease treble level
5. VOL+
Increase volume
6. VOL-
Decrease volume
8. BASS+
Increase bass level
9. BASS-
Decrease bass level
7. RESET(PLAY/PAUSE)
Start, pause or resume play in BT Mode Press and
hold for about 2 seconds to reset the volume
level and switch to the Music EQ effect.
10. MUSIC
Selects MUSIC for the sound effect
11. MOVIE
Selects MOVIE for the sound effect
12. DIALOGUE
Selects DIALOGUE for the sound effect
13. INDICATOR
Press to turns on/off the indicators on the Bar Speaker.
14. TV ARC
Set the input source for the Soundbar to HDMI ARC mode
15. BT
Set the input source for the Soundbar to Bluetooth mode
16. AUX
Set the input source for the Soundbar to AUX mode
17. OPT
Set the input source for the Soundbar to Optical mode
STEP 1: Plug the audio connector
into the audio input port on
another main unit
STEP 2: Align the arrows on the
two stickers
STEP 3: Twist clockwise about 20
degrees until locks securely
STEP1
STEP2
STEP3
Very Important!!!
!
RL
AUDIO OUT
DIGITAL AUDIO
OUT
OPTICAL
AUX
HDMI IN
ARC
TV(ARC)
OPTICAL
OR OR
To Next Page
Need help?
General
