Phenix Technologies 600 SERIES User Manual

6CP100/50-10
7-2
TROUBLESHOOTING
Specific Problems (cont’d)
4. Currentmeter inoperable?
 Binding post jumper clip installed between ground and guard with a grounded test object.
 Connection between currentmeter and high voltage test specimen return connected improperly.
 Meter damaged
 Faulty TX1 interconnect cable.
 Damaged or inoperative range switch or wiring.
 Faulty Circuit on PCB1387.
5. Voltmeter inoperable?
 Faulty TX1 interconnect cable.
 Meter damaged.
 No high voltage present at transformer output.
 Damaged or inoperative Measurement Divider Switch.
 Faulty circuit on PCB1387.
6. No output voltage from high voltage section?
 No input to voltage regulator section, possible problems with K8 or K3, regulator (T1), or with
Transformer Power circuit breaker.
 Internal connection broken.
 High voltage winding of T2 short circuited.
 Refer also to 1 and 2 above.

Phenix Technologies 600 SERIES Specifications

General

Brand	Phenix Technologies
Model	600 SERIES
Category	Diagnostic Equipment
Language	English