EasyManuals Logo

Phenix Technologies 600 SERIES User Manual

Default Icon
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
6CP100/50-10
1-1
SECTION 1: TECHNICAL SPECIFICATIONS
Input
220 - 240 volts, single phase, 50/60 Hz, 30 amperes
Output Rating
0 - 50 kilovolts, 200 milliamperes
0 - 100 kilovolts, 100 milliamperes
Duty Cycle Capacitive Loading
5 minutes ON /15 minutes OFF @ 10 kVA
15 minutes ON / 1 hour OFF @ 7.5 kVA
1 hour ON / 1 hour OFF @ 5 kVA
Type of Cooling
ONAN (Oil Natural / Air Natural Convection)
Operating Ambient Temperature
10 40 degrees C
Output Termination
2” Polished Ball – 50 kV
3” x 12” High Voltage Spinning 100 kV
Metering - Digital
Output Voltmeter: 3 ½ Digit LCD, Accuracy ±(0.8% of reading + 0.2% of range)
Output Currentmeter: 3 ½ Digit LCD, Accuracy ±(0.8% of reading + 0.2% of range)
4 Ranges: 0-200µA, 2mA, 20mA, 200mA
Sizes and Weights
Control/Regulator Section: 21.25” (540mm) W x 16.75" (426mm) D x 13.75" (350mm) H;
63 lbs. (29 kg)
High Voltage Section: 19” (483mm) W x 19” (483mm) D x 29” (734mm) H;
280 lbs. (127 kg)
Additional Equipment
Cart: 22.5” (572mm) W x 29.25” (743mm) D x 50” (1270mm) H;
70 lbs. (32 kg)
Cables: 30 lbs. (14 kg)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Phenix Technologies 600 SERIES and is the answer not in the manual?

Phenix Technologies 600 SERIES Specifications

General IconGeneral
BrandPhenix Technologies
Model600 SERIES
CategoryDiagnostic Equipment
LanguageEnglish