6CP100/50-10
9-2
CHECKING OIL PURITY
a. High Dielectric Strength:
Transformer Oil has high electrical insulating values as shown by their dielectric strengths of over 30,000 volts.
b. Excellent Oxidation Stability:
Excellent oxidation stability and high resistance to sludging provide protection, particularly where high
temperatures are likely to be encountered. These products are specially refined to ensure long time service
with a minimum of maintenance.
c. Freedom From Contaminants:
Absence of organic acids, corrosive sulfur, and other foreign materials, which might affect metals or insulation,
ensures long life for the oil as well as the electrical units.
d. High Interfacial Tension:
High interfacial tension shows the absence of soluble polar contaminants. Refinery sealed containers assure
maintenance of purity in transit.
e. Good Heat Transfer Properties:
Good circulation and rapid transfer of heat from the coils to the cooling fins are assured by low viscosities at all
operating temperatures.
Typical Test Data for Transformer Oil
DDF (Power Factor) @100ºC
Breakdown voltage (2mm gap)
PCBs – Detection Unit 1 mg/kg
To Next Page
Loading...
Need help?
General