Phenix 4100-10 - Page 19

DCD 4100-10
10-1
SECTION 10: RECOMMENDED SPARE PARTS
Phenix Technologies recommends that the customer purchase and stock the following parts for normal
maintenance of the unit. The recommended quantity should be sufficient to support the unit during normal
operation.
If the unit will be operated at an isolated site for an extended period or will be subjected to unusual stresses, a
larger quantity of parts should be stocked as spares. In such cases, contact Phenix Technologies for a
recommendation.
Current prices may be obtained by contacting the Parts Ordering Department at Phenix Technologies.
Part Name
Computer
Number
Recommended
Quantity
Digital Panel Meter, 3 ½ Digit LCD, 2V (M1,2)
1506400
1
Analog 1 ½” Charging Current Meter (M3)
1501016
1
Lamps, 60 V, EAO
1420150
5
EAO Momentary – 1 POLE Switch (SW 2,34)
1860120
1
Limit Switch (SW7)
1866005
1
LM311N Comparator IC (U101)
1794493
2
OP400GP OP AMP (U201, 202)
1794105
2
Relay, Control (K1)
1700610
1
Fuse, 1 A, 250 V, (F1)
1603601
1
Power Input Cord
1077167
1
Binding Post- RED
1351102
1
Binding Post - GREEN
1351103
1
Binding Post - WHITE
1351104
1
High Voltage Cable Assy.
30070015
1
Return Cable Assy.
30080010
1
Ground Cable Assy.
30080011
1