Phenix 4100-10 - Introduction to DC Dielectric Test Set

INTRODUCTION
The DC Hipot line offered by Phenix Technologies is ruggedly built and suitable for field or
lab use. It is designed to test electrical switchgear, cables, motors, generators, and
protective equipment. DC testing is popular because the equipment is more compact and
lighter in weight than comparable AC equipment.
Design and Safety Features
 Output voltage continuously adjustable to 100kV DC.
 “Zero Start” voltage interlock and external safety interlock.
 Leakage current measurements available from .01 to 20,000 microamps DC.
 Removable line cord.
 Rotary switch selection simplifies operation.
 Integrated cable storage bin.
 Built in discharge circuit rated at 6 kilojoules.
 Light weight, portable, and enclosed in rugged, high-density polyethylene carrying case.
 Adjustable overcurrent trip point from 10%-110% of each range.
 Large, easy to read LCD meters.
 Input Circuit Breaker / Power Switch.
 Thermal resettable overload protecting high voltage transformer primary circuits.
 Very low ripple at normal hi-pot test impedances.
For full detailed specifications, see Section 1-1.