PHI VILLA E02GF143 - Assembly - Steps 1-3; Attaching Legs and Side Panels

8
Assembly
Step 3:
AA
Step 1:
Connect all four Legs (A,B,C,) to the Table
Top with Burner (G) by using four M6 x10
Bolts (AA).
NOTE: PLACE TABLE TOP TO
NON-ABRASIVE SURFACE.
PLEASE DON’T TIGHTEN THE
HARDWARE AT THIS TIME.
Don’t tighten the hardware.
AA
Step 2:
Connect Side Panel (I) to Back Leg (B)
by
using
four M6
x 10 Bolts (AA).
Connect Side Panel (I) to Front Leg (C)
and the other Back Leg (B) by using four
M6 x10 Bolts (AA).
A
I
C
B
B
AA
Connect Side Panel With Window (J) to
Front Leg (A) and one Back Leg (B) by
using
four M6
x 10 Bolts (AA).
J
A
B
A
B
B
C