Step 5:
9
Assembly (continued)
Step 5:
AA
Step 4:
Connect Gas Tank Support (K) to the
semi-assembled body by using four M6x10 bolts(AA) .
Please tighten all the screws for step 1-4.
Slide the hinge of Door (H) to Front Leg
(C).
H
E
Burner
Step 6:
Place the fire glass into fire bowl.
Note: Ensure no fire glass is placed on
the ignition portion of the burner.
Then place the Lid (E) on.
Note: The cover must be removed when
the burner is in operation. Wait until the
unit cools before installing the cover.
To Next Page
Loading...
