PHI VILLA E02GF143 - Assembly - Steps 7-8; Securing Cylinder and Installing Battery

Assembly (continued)
10
Step 7:
AAA Battery
Put the cylinder into the Gas Tank Support
(K), and secure the cylinder by tightening
the screw in the gas tank support.
Connect the hose and regulator to cylinder
The propane cylinder is sold separately
.
Use a standard 20 lbs propane cylinder
only.
Step 8:
Open the ingniter cover and place the AAA battery
into it. Then tighten the ingniter cover completely.
Finish and enjoy your fire pit!