When the machine is arranged in dehumidifying operation, detected water tank water level reaches
the set height, the buzzer will alarm, water filled icon lights , at the same time the machine stops
running.
Remove the water tank, the water drained, and then back into the water tank, water is full of icons is
extinguished, the machine will press is full of water before setting state restart run, (time interval to
put back the water tank full of water 3 minutes dehumidifying function will not start. (Note: only
running dehumidifying operation has this function)
Warning: if the water tank is filled with water detection buoy dirty or a foreign matter, buoy can not
with the water tank water level rising and a normal floating water tank is full, May the water tank is
filled with water without stopping machine, thereby causing water to the floor. Please clean the
water tank and the buoy in time.
The machine is working, touch the button for 5 seconds, the original display the humidity value
of the digital display shows the current temperature, after 8 seconds to turn display the humidity.
During the operation, any malfunction forced compressor failed, resulting compressor shut off, it
takes 3 minutes to rework for protection period.
The machine is working in the drying operation, the compressor stops working, if immediately
restart, cooling system pressure is not balanced, easy to lead for overload protection. The machine is
equipped with the compressor start delay time for 3 minutes starting function. In 3 minutes, the
machine stops dehumidification, dehumidification icon flashes. After 3 minutesif the machine
started dehumidification, dehumidification icon stops flashing.
(Note: only the running dehumidifying operation has this function)
Protection Of Water Full
Room Temperature indication
Processions Of Abnormal Compressor
-
Compressor delay start function
P16
To Next Page
Loading...
