Run dehumidification under high ambient temperature, set in the low wind speed operation
possible overload of the compressor and stop the dehumidification, the machine is provided with a
high temperature environment will be forced low wind speed into the higher wind speed operation,
to the ambient temperature drops to restore the original settings of the gear operation.
Concrete translation as follows: T: represents the ambient temperature RH: representation of
environmental humidity
1. 28 < T < 32 c and RH = 75%, 1, 2 speed set dehumidification cast to 3 speed, other gears
according to the set operation.
2. when T is greater than 32, set 1, 2, 3 speed dehumidification cast to 4 speed, other gears
according to the set operation.
The normal operation of the wind speed
When sensor detected ambient temperature is ≤3℃ or ≥40℃,as to protect the unit which will shut off
automatically and beeper continuous flashing signals. Fan maintains the original operation.
When sensor detects the environment temperature is greater than or equal to 5℃ or less than or
equal to 38 ℃, the machine run recovery dehumidification, dehumidification icon stop flashing
(protection of compressor and then start delay for 3 minutes)
High temperature casts fan speed function
High temperature casts fan speed function
P17
Operation mode
air purification
Dehumidifier
Fan speed
Auto
1speed
2speed
3speed
4speed
5speed
Auto
1speed
2speed
3speed
4speed
drying
mark
Fan speed serial No
Fan rotate speed (rpm)
300-650-900-1050-1250
300
650
900
1050
1250
550-650-750-900
55
650
750
900
1000
1
1
2
3
4
5
6
7
8
9
10
2 3 4 5
6 7 8 9
To Next Page
Loading...
