What does E01 error mean on a Philco PLCD06GGPWT?
The E01 error on your Philco Washer indicates that the machine door is left open. Close the machine door. If your machine persists to indicate fault, turn off your machine, unplug it and contact the nearest authorised service immediately.
What does E02 error mean on a Philco PLCD06GGPWT?
The E02 error on your Philco Washer indicates that the pump is faulty or pump filter is clogged or electrical connection of the pump is faulty. Turn on the faucet. Mains water may be cut-off. If the problem still continues, your machine will stop after a while automatically. Unplug the machine, turn off your faucet and contact the nearest authorised service.
What does E03 error mean on a Philco PLCD06GGPWT?
The E03 error on your Philco Washer indicates that the water pressure or the water level inside the machine is low. Clean the pump filter. If the problem persists, contact the nearest authorised service.
What does E04 error mean on a Philco PLCD06GGPWT?
The E04 error on your Philco Washer indicates that your machine has an excessive amount of water. Your machine will discharge water by itself. Pursuant to discharging operation, turn off your machine and unplug it. Turn off your faucet and contact the nearest authorised service.
Essential guidelines and warnings for the initial and proper use of the appliance.
Critical safety instructions to prevent injuries and risks, covering electrical, fire, and physical hazards.
Instructions on how to remove screws to prevent damage during transport.
Guidance on leveling the machine using adjustable feet for stability.
Steps for safely connecting the washing machine to the power supply.
Instructions for connecting the water supply hoses to the machine.
How to properly connect the drain hose for water removal.
To Next Page
General
