Copyright © 2020, Fast ČR, a. s. Revision 04/2022
EN - 9
INSTALLATION
IMPORTANT!
● FOR ELECTRICAL CONNECTION CAREFULLY, FOLLOW THE
INSTRUCTIONS GIVEN IN THIS MANUAL. UNPACK THE APPLIANCE
AND CHECK IF THERE ARE DAMAGES ON IT.
● DO NOT CONNECT THE APPLIANCE IF IT IS DAMAGED. REPORT
POSSIBLE DAMAGES IMMEDIATELY TO THE PLACE YOU BOUGHT
IT. IN THIS CASE RETAIN PACKING.
● IT IS ADVISABLE TO WAIT AT LEAST FOUR HOURS BEFORE
CONNECTING THE APPLIANCE TO ALLOW THE OIL TO FLOW BACK
IN THE COMPRESSOR.
● ADEQUATE AIR CIRCULATION SHOULD BE AROUND THE
APPLIANCE, LACKING THIS LEADS TO OVERHEATING. TO
ACHIEVE SUFFICIENT VENTILATION, FOLLOW THE INSTRUCTIONS
RELEVANT TO INSTALLATION.
● WHEREVER POSSIBLE THE BACK OF THE PRODUCT SHOULD
NOT BE TOO CLOSE TO A WALL TO AVOID TOUCHING OR
CATCHING WARM PARTS COMPRESSOR, CONDENSER TO
PREVENT THE RISK OF A FIRE, FOLLOW THE INSTRUCTIONS
RELEVANT TO INSTALLATION.
● THE APPLIANCE MUST NOT BE LOCATE CLOSE TO RADIATORS
OR COOKERS.
● MAKE SURE THAT THE MAINS PLUG IS ACCESSIBLE AFTER THE
INSTALLATION OF THE APPLIANCE.
● PLACE ALL PACKAGING MATERIALS OUT OF THE REACH OF
CHILDREN, THERE IS A RISK OF SUFFOCATION.
To Next Page
Loading...
