k
TANK & BATTERYMONITOR TBM
V1.1 - May 2010 Page 5
1.4. WARRANTY
philippi elektrische systeme gmbh grants a two year limited and not transferable warranty for the first buyer of
this equipment, commencing on the date of purchase and covers defects in manufacturing, parts and materials.
Production or material defects will be corrected without costs if:
x the equipment will be send to us at the expense of the sender
x enclose the receipt (copy) of purchase
x the equipment was treated in the intended use
x no strange spare parts were built in or external effects happened
Not included in the warranty are damages from:
x overvoltage in the inputs or reverse polarity
x entered liquids in the device or oxydation through condensation
x lightning
Not under warranty are follow-up costs and normal wear and tear.
In case of warranty there must be a specification of the defect. A detailed description of the
defect will ease and speed up the repair.
Please note that we cannot accept carriage forward deliveries.
1.5. EXCLUSION OF LIABILITY
Both the adherence to the operating instruction, and the conditions and methods during installation, using
and maintenance of the TBM cannot be supervised by philippi electrical systems. Therefore we do not take any
responsibility for loss, damage or costs, which develop due to incorrect installation and/or
inappropriate enterprise.
1.6. QUALITY MANAGEMENT
During the process of manufacturing all devices pass several checks, controls and tests. Production, controls
and tests are due to given protocols. Each TBM has its own serial number. Please do not remove this label.
The assembly and testing of all TBM devices is carried out completely in our company at Remseck am Neckar.
2. SAFETY REFERENCES
x unautorised change to the equipment will invalidate the CE sign
x the installation of the TBM may be made only by electrical specialists.
x before connection of the TBM the battery terminals must be clamped.
x Important! Pay attention to the correct polarity of the batteries!
x the inlet of the current supply shunt must be secured
The assembly and operating instruction is a component of the TBM package. It must be kept
(for reference). Importantly: - for later maintenance work - and for the use of subsequent owners
of the equipment.
To Next Page
Loading...
Need help?
General
