Philips 107E7 - Page 73

17” CDT Color Monitor 107E7
73
5.10 Texture/Glossing of housing
• The texture area and texture no should follow Philips make-up sheet.
• The exterior surfaces shall have a uniform texture.
•
Philips must approve the mold texturing.
•
Detail document for texture refer to UAN-D249.
•
< = 20 gloss units
5.11 Tilt/Swivel Base ranges
• Tilt Range - Up = 14° ± 1°, Down = 3.5° ± 1°
• Swivel Range - ± 90°
• Base should not break plastic when attempting to rotate it past the stops.
5.12 Movement of unit with base
•
Base must have non-marring, non-staining feet.
•
Unit must tilt up and down with no “Stick / Slip”.
• Base must provide sufficient friction to hold unit in desired position after adjusting tilt.
5.13 Label
• Regulatory label / Carton label should follow Philips requirement.
•
Detail document refer to Philips Engineering Reference Book.
5.14 Product Dimensions / Weight
•
Unit dimension (with stand) - 397mm (W) x 382mm (H) x 415mm (D)
•
Packed unit dimension (carton) - 460mm (W) x 420mm (H) x 506mm (D) for China, India
446mm (W) x 420mm (H) x 470mm (D) for other regions
•
Net weight - 12.5 kg
•
Gross weight - 14.8 kg (for China, India)
14.4 kg (for other regions)
5.15 Transportation
Transportation standards refer to UAN-D1534/00 and TYE-M0002.