1) Press the button on the monitor. The MAIN CONTROLS window appears. LANGUAGE is
highlighted.
2) Press the
button until VIDEO NOISE is highlighted.
3) Press the button. The VIDEO NOISE window appears. PHASE is highlighted.
4) Press the or button to adjust the phase.
5) When finished with PHASE, press the
button until CLOCK is highlighted. Next, press the or
button to adjust the clock.
file:///D|/Philips LCD/english/150S/OSD/OSD_CONT.HTM (7 of 16) [1/20/2001 3:13:10 PM]
To Next Page
Loading...
