1. D-Sub Port - Attach the D-Sub connector that comes with your monitor here.
Other end connects to your PC.
2. Power in - Attach power cable here.
3. USB Port - Attach your USB Upstream cable here. Connect the other end to
your USB hub or your PC's USB connector. (Not available on all models.)
4. BNC Connectors - Attach the connectors here to get the best video
file:///D|/rita/LF2/LF2/LFa1/multi_manual/english/INSTALL_4/INSTALL.HTM (3 of 4) [8/29/2001 3:11:39 PM]
To Next Page
Loading...
