UP and DOWN buttons are used when adjusting the OSD of your monitor
Brightness hotkey. When the RIGHT arrow is pressed ,the adjustment
controls for BRIGHTNESS will show up.
LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used
in adjusting the OSD of your monitor.
By pressing both the UP and OK buttons, you can easily access the Input
Signals A and/or B.
RETURN TO TOP OF THE PAGE
Rear View
file:///D|/rita/LF2/LF2/LFa1/multi_manual/english/INSTALL_4/INSTALL.HTM (2 of 4) [8/29/2001 3:11:39 PM]
To Next Page
Loading...
