103
9
Go to cover page
General Troubleshooting Guide
202P4 M25P
It is need to check and
repair the monitor.
OK
END
NO
MOIRE
YES
: Moir
is a
natural effect
or
phenomenon
of
CRT
that
has the appearance
of a wavy pattern
which is repetitive and superimposed on the screen as ripple images. , not just Philips monitor had.
These are a few suggestions to help for reducing or minimizing the effect.
- Some monitors have a
M
oir
c
ance
ll
a
t
ion
feature,
activate
it to the
on
position
or adjust the Moire cancellation function via the OSD manipulation on the monitor.
- Change resolution to the recommended standard for the specific monitor size.
- Change Window viewing pattern/scheme to a pattern where the moir
is less
v
isible.
- Change horizontal and vertical size to optimize the reduction of the moir
e
ffe
c
t
.
MOIR
A fringe pattern arising from the interference between two superimposed line patterns.
In a monitor it comes from the interference between the shadow mask pattern
and the video information (video moir,
and the horizontal line pattern (scan moir.
on the screen and becomes more noticeable as monitor resolution increases.
Since the video signals varies continuously, little can be done about video moir
by appropriate choice of this frequency. Autoscan (MultiSync) monitors, however,
which operate over a range of scanning frequencies,
may sometimes exhibit Moir in certain
video mod
e
s
.
Several sources can act as a catalyzer to produce Moire. They are : The CRT,
shadow mask, the electron beam spot size, the resolution, video patterns,
and the horizontal and vertical size.
11
Scan moir
D
e
pe
n
d
s
On the horizontal scanning frequency and can be alleviated.
It shows itself as wavy patterns
and between the shadow mask
To Next Page
Loading...
