In the Program Installation sub-menu, program settings can be set. When this menu is open, all the
protections are inactive.
• Program No.: The program type can be selected with the cursor left/right buttons. These buttons
will toggle between all available types: "TV", "INFO", "PAYTV" and "RADIO".
If the program number of a certain type is 0, the corresponding type is not displayed. In order to
display a program number of the above-mentioned types, always enter two numbers, for example:
“01” for TV1 or digit “1” and up/down cursor.
• Input: The "Input" menu item selects the desired input source that will be assigned to the program.
Possible values are TUNER, AV1, SIDE AV, SIDE S-VIDEO, RADIO, PC, and HD. Some input
sources may not be available on certain sets (see accompanying table).
Model / Input AV1 AV2 Side AV Side S-Video DVI
20HF5474 Scart1 - Video In S-Video In DVI
23HF5474 Scart1 - Video In S-Video In DVI
Note: When a SmartCard XPress Box is used, it is usually connected to Scart1.
- 7 -
To Next Page
Loading...
