EasyManua.ls Logo

Philips 20HF5474/10 - Control settings; Energy Saving Mode (ESP); Channel Tuning and Muting; Volume Limits

Philips 20HF5474/10
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
In this sub menu, the Control settings of the TV can be configured.
ESP: Energy Saving Programmability Mode (ESP) controls the maximum continuous
viewing time allowed by the control system. The ESP Menu function is shown as "ESP",
and its valid values are 00 - 99 (in hours). 00 value means OFF.
Audio/Video Mute: The Audio/Video Mute function determines whether the video
should be blanked and the audio should be muted if the currently tuned channel has no
signal.
Step Tuning: If YES, TV programs (1 to 9) are tuned immediately when a digit is pressed.
If NO, tuning is performed only after the dash disappears.
Digit Timeout: This is the time-out to enter the second digit for TV program 10 onwards.
Auto Scart: Enable/ disable automatic switching to external SCART source.
Always RGB: This item allows RGB on the AV connectors to be enabled or disabled.
Min Volume: This item sets the limit for minimum volume allowed for the television set.
Use right/left cursor to adjust.
Max Volume: This item sets the limit for the maximum volume allowed for the television
set. Use right/left cursor to adjust.
- 12 -

Related product manuals