Antenna connection
• Connect the aerial plug to the antenna socket
on the backcover.
• Insert the mains plug into the wall socket.
Mains connection
• For correct mains voltage, refer to type sticker
at the rear of the TV set
• Consult your dealer if mains supply is different.
Note :This diagram is not representative of the
actual plug and socket.
Switching on the set
• Press the main power button to switch on/
off theTV.
• If the set is on standby (indicator is lit),
press the Power button on the remote
control to switch on set.
• Insert the correct type of batteries into the
compartment.
• Ensure the batteries are placed in the right
direction.
TV HOOKUP (BASIC CONNECTION)
REMOTE CONTROL CARE AND USE
To Next Page
Loading...
