9
EN
SMART Picture
You can change the picture setting during play-
back.
1.
1.Press to show the current pic-
ture setting.
2.
2.Press again to select the pic-
ture setting of your choice.
'NATURAL': best all-purpose-setting to watch
a well-recorded tape (natural picture).
'SPORTS': accentuate the details.Valuable to
watch high quality tapes or recorded sport events.
'MOVIE': to get the best picture when you play
a movie.
'WEAK SIGNAL': for rented tapes. It reduces
the noise, making the picture more enjoyable.
'VIDEO GAMES': best setting when playing a
video game.
Switch-off function (SLEEP TIMER)
You can programme your set to switch-off auto-
matically after a predetermined period.
1.
1.Press .
2.
2.Press repeatedly to extend the time
until switch-off in 30 minute increments.
The screen will show the time remaining until
switch-off, e.g.: '+0:30'
The machine now counts backwards to the
switch-off time.
SLEEP
SLEEP
SMART PICTURE
SMART PICTURE
The maximum time period to be set until switch-
off is 2 hours.
If you would like to turn this function off, press
on the remote control several times until
switch-off appears. '--:--' will appear on the
screen.
To check the time until switch-off, press
on the remote control.
If a recording is in process, switch-off function
will be cancelled.
SLEEP
SLEEP
Playing cassettes
You can use this TV-Video Combi to playback
recorded VHS video cassettes.You can operate
the TV-Video Combi using the remote control or
the buttons on the set.
Your TV-Video Combi can only record and play
standard VHS cassettes.
1.
1.Put a cassette into the cassette slot. The cas-
sette is inserted automatically.
2.
2.Press to view the tape.
3.
3.To stop the playback, press or
on the TV-Video Combi.
4.
4.To eject the cassette, press or
when the TV-Video Combi stops
the playback.
Playing back NTSC cassettes
Cassettes that have been recorded in the NTSC
standard (for example, American cassettes) can
be played back using this TV-Video Combi.
Displaying current tape position
The following information is displayed on the
screen: e.g.: 0:02:45 shows the counter in hours,
minutes and seconds.
SP/LP: will show the recorded speed of your
cassette
'REM 0:06': will show the actual amount of play-
ing/recording time left on the tape in hours and
minutes.
When you play an NTSC cassette, the TV-Video
Combi will show 'REM -:--'.
STOP/EJECT
EJECT
AA
STOP/EJECT
STOP C-L
PLAY B-K
5. Playback
Do I need to change the playback speed
when playing back LP recordings?
During playback, the correct speed will auto-
matically be selected. For more information,
please read the section 'Selecting the recording
speed (SP or LP)' in the chapter 'Manual
recording'.
DIGITAL STUDIO PICTURE CONTROL
Philips has developed a system which produces
the best possible playback quality. For old and
often-used video cassettes, this system reduces
interference. For new or high quality cassettes,
it emphasises the details.
Picture/ sound quality is poor
When playing rental videos or older, poorer
quality cassettes, it may not be possible to com-
pletely filter out picture and sound interference.
This is not a fault in your machine. Read the
section 'Manual tracking'.
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 9
To Next Page
Loading...
