Philips 21PV375 - Helpful Hints; Programming a Recording (Without the SHOW VIEW System); How to Check, Change or Delete a Programmed Recording (TIMER); How to Change a Programmed Recording (TIMER)

14
EN
7.
7.Insert a cassette with an intact security tab
(unprotected).
Helpful Hints
Programming a recording (without
the SHOWVIEW system)
1.
1.Press . The main menu will appear.
2.
2.Select 'TIMER' with . Then
press .
3.
3. Select ONCE, DAILY, or WEEKLY recording with
. Then press .
If all TIMER blocks are in use, 'FULL' will appear
on the TV screen.
4.
4.Select the desired TIMER block with .
5.
5.Enter the Start time (START) End time (STOP),
Programme number (PROG.), VPS/PDC infor-
mation and the Date with .
6.
6.When all inputs are correct, press
. The programming information
is stored in a TIMER block.
7.
7.Insert a cassette with an intact security tab
(unprotected).
How to check, change or delete a
programmed recording (TIMER)
1.
1.Press . The main menu will appear.
2.
2.Select 'TIMER' with . Then
press .
3.
3.Select 'TIMER LIST' with ,
and confirm with
.
4.
4.Select timer block with .
5.
5.To cancel the recording, press .
6.
6.To end, press
.
How to change a programmed
recording (TIMER)
1.
1.Press . The main menu will appear.
2.
2.Select 'TIMER' with . Then
press .
3.
3.Select ONCE, DAILY, or WEEKLY recording
with . Then press
.
FWD 1- B
STOP C-LPLAY B-K
FWD 1- B
STOP C-LPLAY B-K
MENU
STATUS/EXIT
CLEAR
FWD 1- B
FWD 1- B
STOP C-LPLAY B-K
FWD 1- B
STOP C-LPLAY B-K
MENU
STATUS/EXIT
0..9
0..9
FWD 1- BSTOP C-LPLAY B-K
FWD 1- B
STOP C-LPLAY B-K
MENU
The TV-Video Combi will not operate
* If you want to cancel the programmed recording,
press longer than 3 seconds.
Cassette is ejected during recording
* The end of the tape was reached during recording.
Error message:
* If you forgot to insert a cassette,'INSERT CAS-
SETTE FOR TIMER RECORDING' will appear.
Error message: ‘FULL’
* If this error message appears after pressing
, then all TIMER blocks are already pro-
grammed. No more recordings can be pro-
grammed. If you want to clear a programmed
recording (TIMER block), select the programme
number on TIMER LIST menu and press .
Cassette was ejected as soon as inserted.
* If a cassette with the security tab removed
was inserted, 'PROTECTED CASSETTE
TIMER CANNOT RECORD' will appear.
Undo the erase protection (chapter 'Manual
Recording', section 'Preventing accidental eras-
ing') or insert another cassette.
CLEAR
SV/V
+
STANDBY/ON
yy
SELECT KL CHOOSE B
→
ONCE
DAILY
WEEKLY
TIMER LIST
END=EXIT
Selecting once/daily/weekly recordings
Use to select from the fol-
lowing options:
'ONCE': Recording once
'DAILY': Repeated daily recordings from
Monday to Friday
'WEEKLY': Repeated weekly recordings (every
week on the same day)
STOP C-LPLAY B-K
Programming a recording from the external
sources
You can also programme recording from an
external source via the Scart socket AV1 or the
front A/V connectors AV2.
SELECT KL CHOOSE B
ONCE
DAILY
WEEKLY
→TIMER LIST
END=EXIT
Switching on 'VPS/PDC' in the 'START' input field
Select 'VPS/PDC' using . Press
'1' to switch off 'VPS/PDC' or press '2' to switch on
'VPS/PDC'.
CLEAR
FWD 1- B
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 14