220CW8 LCD
Advanced OSD Adjustment
7
Advanced OSD Adjustment
MENU
MENU
MENU
1. Front control panel
2. To Lock/Unlock OSD function
The OSD function can be locked by pressing button
for more than 10 seconds, the screen shows following
windows for 3 seconds.
Every time when you press any button, this message
appears on the screen automatically.
Locked OSD function can be released by pressing
button for more than 10 seconds. While press button
for OSD unlocked purpose, the screen will keep showing
OSD MAIN MENU LOCKED until OSD function unlocked and
screen automatically shows following window for 3 seconds.
3. Access Factory Mode
To hold and buttons, you can saw the LED
light flashing at this time. Then release the button and
Keep pressing the button. The monitor will power on
and LED light give out orange light. Press to bring up
OSD menu for confirmation as below:
If this message appeared, means monitor already entered
the factory mode.
AUTO POWER
AUTO
POWER
MENU
4. Entering Burn-in mode and others
If you access into factory mode, press
then press to confirm, OSD menu will
convert into another format as below:
Move the cursor by button, and press the
to change the burn-in mode from to .
Leave factory mode by simply power off the monitor.
* If you only want to enter burn in mode, please don’t change
any other setting items as above listed.
* Unfortunately, if some settings has been changed by
unknown reasons or wrong operation. Please refer to the
chapter of “W/B Adjustment” to guide the operator how to
restore the default settings or do adjustment.
Appendix:
Explanation of above listed selections.
MENU-PICTURE-
FACTORY, MENU
MENU
War ni ng
or
button YES NO
UP
DOWN
Model Name BIOS Revision BIOS issued date
Selection Description
Burn in On/Off Enter Aging Mode
Auto Color Auto Color Adjustment
Con Contrast Adjustment
Bri Brightness Adjustment
Gain
ADC Gain Value Adjustment
(Auto adjustment by H/W when implement Auto Color function)
Offset
ADC Offset Value Adjustment
(Auto adjustment by H/W when implement Auto Color function)
sRGB sRGB Color Temperature Gain Value Adjustment
9300K 9300K Color Temperature Gain Value Adjustment
6500K 6500K Color Temperature Gain Value Adjustment
Color Update Save All of Color Temperature Gain Value
Factory Reset Memory Recall to Factory Default Settings
MONITOR CONTROLS LOCKED
ATTENTION
MO NI TOR CONTROLS UNLOCKED
ATTENTION
HUDSON 220CW8 V0.28 2007-07-16
NT68670 BZ1A0725123456
LPL_LM220WX1
Auto Color
Color Reset
Gain
R200
G189
B191
Offset
R125
G111
B111
Power On Timer:
0
3
Power On Timer Reset
Burn In
NO
Reset
SSC
4
Exit
http://www.wjel.net
To Next Page
Loading...
