Philips 220CW8FB/00 - 5.2.1 15 Pin Mini D-Sub Connector; Connectors; Cosmetics Appearance; GAP Definition

Gross weight : 5.3 Kg for WW
: 5.3 Kg for China
3. LCD SPECIFICATION
3.1 LCD specification
CMO LPL
Panel
M220Z1-L03 LM220WE1-TLD1
Resolution 1680x1050 1680x1050
Active area (HxV) 473.76(H) x 296.1 473.76(H) x 296.1
Outside
dimensions(WxHxD)
493.7x 320.1 x 16.5 493.7x 320.1 x 16.5 (Not for
Audio model)
Pitch (mm) 0.282 x 0.282 0.282 x 0.282
Display surface Non-glare type Non-glare type
Color depth 16.7M colors 16.7M colors
Backlight 4 CCFL 4 CCFL
Viewing angle 170:H/ 160:V 160 for H/V
Contrast ratio 1000:1 (Typ); 700:1 (Min) 1000:1 (Typ); 600:1 (Min)
White luminance 300nit (Typ); 250nit (Min) 300nit (Typ); 250nit (Min)
Color gamut 72% 72%
Gate IC TBC TBC
Source IC TBC TBC
Response time 5ms 5ms
4 COSMETICS APPEARANCE
4.1 GAP definition
The gap between LCD and front bezel must be <= 1.0mm
4.2 Panel Offset
Panel Offset: Panel disposition tolerance inside the front bezel must be <=1.0mm
4.3 Horizontal tilt
Horizontal tilt between front bezel & LCD shall be <= 1.0mm
5. CONNECTORS
5.1 Video Connection
The monitor is equipped with a 15 pin mini D-SUB connector.
5.2 PIN Assignment
5.2.1 15 pin mini D-Sub connector
The PIN assignment of the 15 pin mini D-SUB connector / cable is as follows:
71 220CW8 LCD
http://www.wjel.net