Use your TV Monitor4
This section helps you perform basic TV
Monitor operations. Instructions on advanced
TV Monitor operations are provided in Section 5
Use more of your TV.
Switch on/off or to standby4�1
Switch on
If the power indicator (1) is off, press •
POWER on the side of the TV Monitor.
Switch off
Press • POWER on the side of the TV
Monitor. The power indicator (1) switches
off.
Switch to standby
Press • . on the remote control. The power
indicator switches to standby (red).
Tip E
Though your TV Monitor consumes very
little power when in standby, energy
continues to be consumed as long as the
mains remain connected and powered.
When not in use for extended periods of
time, switch off and disconnect the Product
from the mains.
Switch on from standby
If the power indicator is in standby (red), •
press . on the remote control.
Note D
If you cannot locate your remote control
and you want to switch on the TV Monitor
from standby, press PROGRAM +/- on
the side of the TV.
To Next Page
