Philips 227E4LSB/27 - Setting Up the Monitor; Installation and Package Contents

4
2. Setting up the monitor
2. Setting up the monitor
2.1 Installation
Package contents
VGA (optional)
AC/DC Adapter
DVI (optional)
HDMI (optional)
Audio cable (optional)
227E4Q
227E4L
 Note
UseonlytheAC/DCadaptermodel:Philips
ADPC1245(227E4QHAD),ADPC1236(227E4
LSB/LHSB/LHAB,227E4QSD/QHSD)
Install base stand
1. Placethemonitorfacedownonsoft
andsmoothsurfacetakingcaretoavoid
scratchingordamagingthescreen.
2. Holdthebasestandwithbothhandsand
firmlyinsertthebasestandintothebase
column.
(1)Gentlyattachthebasetothebase
columnuntilthelatchlocksthebase.
(2)Useyourfingerstotightenthescrew
locatedatthebottomofthebase,and
securethebasetothecolumntightly.
2
1