Philips 22PFL4505D/F7 - Cabinet Disassembly Instructions

4-1 PL10.10DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Step/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Unclamp/
Desolder
Note
[1]
Stand
Assembly
D1 2(S-1) ---
[2]
Rear
Cabinet
D1 2(S-2), 6(S-3), 5(S-4) ---
[3]
Function
CBA
D2
D3
2(S-5), *CN101,
Function Knob,
Knob Frame
---
[4] Speaker
D2
D3
*CN872, *CN2861 ---
[5] Front Flare D2 --------------- ---
[6] Main CBA
D2
D3
8(S-6), 2(S-7),
*CN102, *CN201,
*CN301, *CN302,
*CN601, *CN702,
*CN873, AC Holder,
---
[7] Jack CBA
D2
D3
3(S-8), Jack Holder(A) ---
[8]
Digital Main
CBA Unit
D2
D3
(S-9), 4(S-10),
4(S-11), 2(H-1),
*CN3902, Shield Box,
Jack Holder(D)
---
[1] Stand
Assembly
[2] Rear Cabinet
[6] Main CBA
[7] Jack CBA
[5] Front Flare
[4] Speaker
[8] Digital Main
CBA Unit
[3] Function
CBA
[10] LCD Module
Assembly
[11] Front
Cabinet
[9] IR Sensor
CBA
[9]
IR Sensor
CBA
D2
D3
Sensor LED Lens ---
[10]
LCD
Module
Assembly
D2 --------------- ---
[11]
Front
Cabinet
D2 --------------- ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
Step/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Unclamp/
Desolder
Note