Philips 234E5 - Operating the Monitor

6
2. Setting up the monitor
Connect to PC
1. Connect the power cord to the back of
the monitor firmly.
2. Turn off your computer and unplug its
power cable.
3. Connect the monitor signal cable to the
video connector on the back of your
computer.
4. Plug the power cord of your computer and
your monitor into a nearby outlet.
5. Turn on your computer and monitor. If the
monitor displays an image, installation is
complete.
2.2 Operating the monitor
Front view product description
Model 234E5QSB, 234E5QHSB, 234E5QHSW:
3
5
6 2
3
4
7
Switch monitor’s power ON and
OFF.
Access the OSD menu .
Return to previous OSD level.
Change display format.
Adjust the OSD menu.
Change the signal input source.
SmartImage Lite. There are three
modes to be selected: Standard,
Internet and Game.