What to do if there is a picture but no sound from Philips Monitor?
If your Philips monitor displays a picture but has no sound, check that all cables are properly connected. Additionally, make sure the sound is not muted.
How to fix Philips 231TE4LB/00 when it does not switch on?
If your Philips monitor doesn't switch on, disconnect the power cable from the power outlet, wait one minute, and then reconnect it. Also, check that the power cable is securely connected.
How to fix poor Philips 231TE4LB/00 reception from an antenna connection?
To improve poor Philips monitor reception from an antenna connection, first, check that the antenna is properly connected to the monitor. Loud speakers, unearthed audio devices, neon lights, high buildings and other large objects can influence reception quality. If possible, try to improve the reception quality by changing the antenna direction or moving devices away from the monitor. If reception on only one channel is poor, fine tune this channel.
How to fix Philips Monitor with poor picture quality from connected devices?
To resolve poor picture quality on your Philips monitor from connected devices, check that the devices are connected properly. Also, ensure that the picture settings are correctly set.
What to do if Philips 231TE4LB/00 Monitor remote control is not working properly?
If your Philips monitor's remote control isn't working properly, check that the batteries are correctly inserted according to the +/- orientation. If needed, replace the batteries if they are flat or weak. Also, try cleaning the remote control and the monitor's sensor lens.
How to fix Philips 231TE4LB/00 Monitor when the computer display is not stable?
If the computer display on your Philips monitor is not stable, check that a supported resolution and refresh rate is selected on the computer. Also, set the monitor picture format to unscaled.
What to do if Philips Monitor did not save your picture settings?
If your Philips monitor did not save your picture settings, check that the monitor location is set to the home setting. This mode offers you the flexibility to change and save settings.
What to do if there are problems with HDMI devices on Philips 231TE4LB/00 Monitor?
HDCP support can delay the time taken for a Philips monitor to display content from an HDMI device. If the monitor does not recognise the HDMI device and no picture is displayed, try switching the source from one device to another and back again. If there are intermittent sound disruptions, check that output settings from the HDMI device are correct. If an HDMI-to-DVI adaptor or HDMI to DVI cable is used, check that an additional audio cable is possible could be connected to PC AUDIO IN (mini-jack only).
What to do if the picture does not fit the screen on Philips 231TE4LB/00?
If the picture on your Philips monitor doesn't fit the screen, try a different picture format.
How to fix the picture position if it is incorrect on Philips 231TE4LB/00 Monitor?
If the picture position is incorrect on your Philips monitor, picture signals from some devices may not fit the screen correctly. Check the signal output of the device.
Picture and Display| LCD panel type | TFT-LCD |
|---|---|
| Backlight type | W-LED system |
| Diagonal screen size | 23 inch / 58.4 cm |
| Aspect ratio | 16:9, Widescreen |
| Panel resolution | 1920 x 1080 |
| Response time (typical) | 5 ms |
| Brightness | 250 cd/m² |
| SmartContrast | 20, 000, 000:1 |
| Viewing angle | 170º (H)/160º (V) |
| Contrast ratio (typical) | 1000:1 |
Supported Display Resolution| Optimum resolution | 1920 x 1080 at 60 Hz |
|---|---|
| Video formats | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
Sound| Output power (RMS) | 3 W x 2 |
|---|---|
| Sound System | Mono, Stereo, Nicam Stereo |
Power| On mode power consumption | 25.6 W (typ.) / 34 W (max) |
|---|---|
| Off mode power consumption | 0.3 W (typ.) |
| Standby mode power consumption | 0.3 W (typ.) |
| Ambient temperature | 5°C to 40°C |
| Mains power | 100-240 V, 50/60 Hz |
Dimensions| Packaging dimensions | 612 x 468 x 117 mm |
|---|---|
| Product dimensions with stand | 573 x 410 x 174 mm |
| Product dimensions without stand | 573 x 370 x 39 mm |
Weight| Weight with packaging | 4.83 kg |
|---|---|
| Weight with stand | 3.56 kg |
| Weight without stand | 3.32 kg |
General safety precautions for using the monitor and preventing injury.
Enabling and using Philips EasyLink for HDMI-CEC device control.
Description of buttons located on the side of the monitor.
Description of all buttons on the remote control and their functions.
Buttons for turning the monitor on/off and selecting input sources.
Instructions for turning the monitor on, off, or putting it into standby mode.
Methods for changing TV channels using the remote or monitor buttons.
Selecting different input sources for connected devices.
Turning the volume up/down and muting/unmuting the sound.
Searching and storing channels automatically.
Step-by-step guide to manually search and store analogue TV channels.
Navigating menus for channels, picture, sound, and other features.
Adjusting picture and sound preferences using predefined or manual settings.
Detailed adjustments for contrast, brightness, color, sharpness, and more.
Selecting different picture aspect ratios for optimal display.
Adjusting bass, treble, surround sound, and volume balance.
Accessing and managing the on-screen guide for digital programmes.
Preventing children from viewing unsuitable content using PIN codes.
Solutions for common problems like the monitor not switching on or remote control issues.
Resolving problems with no picture, sound only, poor reception, or picture not fitting the screen.
Resolving issues with no sound, poor sound quality, or sound from only one speaker.
To Next Page
