Philips 231TE4LB/00 - Music Playback and Settings; Slideshows with Music; Listening to Digital Radio

28 EN
C: Check for updates through digital
broadcasts
You can check if there are updates available
through digital broadcasts.
1. Press .
2. Select [Setup] > [Software settings] >
[Check for major updates].
3. If an update is available, follow the
on-screen instructions to start the update.
» The TV restarts after the software
update is complete.
Change TV preferences
Use the preferences menu to customise your
TV settings.
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select one of the following, then press OK.
• [Menu language]: Select a menu
language.
• [Sleep timer]: Switch the TV to
standby after a pre-dened duration.
• [Location]: Optimise TV settings for
your location - home or shop.
• [E-sticker]: This item set the TV to
Shop mode. When any other OSD on
screen, E-Sticker would not come out.
• [Volume bar]: Display the volume bar
when you adjust the volume.
• [Auto switch off]: To conserve energy,
set the TV to switch off automatically
after a period of inactivity.
• [Channel information size]: Change
the type of information that is
displayed when you switch channels.
• [Audio out delay]: Automatically sync
the image on your TV to the audio
from a connected Home Theatre.
• [Teletext 2.5]: With Teletext 2.5, you
can view text with more colours and
better graphics than normal text.
• [Clock]: Display or remove the time
from the TV, and set clock options.
Start a TV demo
You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
Available demos are displayed in the menu list.
1. While you watch TV, press .
2. Select [Setup] > [Watch demo], OK.
3. Select a demo and press OK to view it.
4. To exit, press .
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.
1. Press .
2. Select [Setup] > [TV settings] > [Factory
settings], then press OK.
3. If you are prompted to enter a code, enter
the child-lock code (see ‘Set or change
code’ on page 25).
» A conrmation message is displayed.
4. Press OK to confirm.