Philips 25BDL4050I - Unpacking and Installation; Unpacking Procedures; Package Contents; Installation Notes and Precautions

25BDL4050I
1
1. Unpacking and Installation
1.1. Unpacking
• This product is packed in a carton, together with the standard accessories.
• Any other optional accessories will be packed separately.
• After opening the carton, ensure that the contents are complete and in good condition.
1.2. Package Contents
Please verify that you received the following items with your package content:
• E-Paper Display
• Quick start guide
• Power cord
• Power Adapter
• Philips logo plate
Philips logo plate
Professional
Display Solutions
I Line
25BDL4050I
E-Paper Display
Quick start guide
Power Cord Adapter
* Items may dier in dierent locations
* Display design and accessories may dier from the images shown.
NOTES:
• For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been approved by and complies with
the safety regulations of the particular country.
• Keep the packaging materials appropriately after unpacking the product.
1.3. Installation Notes
• Only use the power cable provided with this product. If an extension cord is required, please consult your service agent.
• The product should be installed on a at surface, or the product may tip over. Leave a space between the rear of the product and the wall for
proper ventilation. Do not install the product in a kitchen, bathroom or a place exposed to moisture, failure to do so may shorten the life of the
internal parts.
• Do not install the product where it is 3,000m and higher in altitude. Failure to do so may result in malfunctions.