Philips 26HF7874/10 - Switch On and OSD Settings; Power-on Behavior and Indicators

In this sub menu the behavior of the TV after switching on and the behavior of the On Screen
Display can be selected.
•
Welcome Message: Press Cursor
Left/Right to display Welcome
message entry menu:
o Display
o Line 1
o Line 2
o Clear
With the Cursor Up/Down you
can set the message characters.
• Switch On Program: This item
sets the television’s program at
switch on.
• Switch On Volume: This item sets the television’s volume at switch on. Use the
Right/Left Cursor buttons to adjust.
• Switch On Pic Fmt: This item sets the television’s Picture Format at switch on. Use the
Right/Left Cursor buttons to adjust.
• Power On: The Power On menu function defines the behavior of the television whenever
AC Power is applied. The valid states are "ON", "FORCED ON", "LAST STATUS" and
“STANDBY”.
o When “ON” & “FORCED ON”, the television can only be switched OFF by
means of the main switch or a set-up remote control or by ESP function (Energy
Saving Programmability controls the maximum continuous viewing time allowed
by the control system).
o When “LAST STATUS”, the television switches on the previous status, ON or
Stand-by.
o When “STANDBY”, the television always switches on in Stand-by.
• Volume Indicator: To display volume indicator when adjusting volume, select "YES".
Select “NO” to hide the volume indicator.
• Program Display: Program Display values can be: Number, Label, All, None.
- 9 -