21
EnglishFrançaiseEspañol
2a
Progressive Scan DVD Player or DVD Recorder to TV
(
)
AUDIO OUT
(DIGITAL)
CABLE / ANTENNA
Add for DVD Recording
Using HDMI
Connect DVD player/DVD recorder to the TV using HDMI cable.
Turn on TV and DVD Player/DVD recorder. Press CH+ or CH- on
remote control to tune to the video supplied by HDMI.
Insert a prerecorded DVD into DVD player/DVD recorder and press
PLAY to verify correct connection.
2b
Progressive Scan DVD Player/Recorder to TV
S-VIDEO
OUT
OUT
OUT
L
R
AUDIO
VIDEO
COMP VIDEO
Y
Pb
Pr
C
AV Button
Remote Control
(
)
AUDIO OUT
(DIGITAL)
CABLE / ANTENNA
A
Back of DVD Player/Recorder
B
Add for DVD Recording
Using Composite Video Input (YPbPr)
Insert Component Video connectors into their corresponding jacks on
both DVD player/DVD recorder and TV (Y, Pb and Pr).
Connect red/white audio cables into the audio output jacks on DVD
player/DVD recorder and audio AV inputs on TV.
Turn on TV and DVD Player/DVD recorder. Press AV on remote
control until the connected source appears on TV screen.
Insert a pre-recorded DVD into DVD player/DVD recorder and press PLAY to
verify correct connection.
3
DVD Player/DVD Recorder/VCR to TV
Back of DVD/VCR
C
AV Button
Remote Control
Back of TV
S-Video Input
(
)
AUDIO OUT
(DIGITAL)
CABLE / ANTENNA
Using S-Video or composite audio-video
Connect S-Video cable to S-Video input on back of TV and S-Video
output on the back of DVD/VCR player or recorder.
OR
Connect composite video cable to Video input on back of TV and Video
output on the back of DVD/VCR player or recorder.
Connect audio cables (red/white) to audio AV inputs on back of TV and
Audio outputs on back of DVD/VCR player or recorder.
Turn on TV and DVD/VCR player or recorder. Press AV button on the
remote control until AV1 or AV2 appears on TV screen.
Insert pre-recorded videotape/DVD into DVD/VCR player or recorder
and press PLAY to verify correct connection.
When you connect S-Video and AV2 at the same time, you can only hear sound
coming from S-Video.
To Next Page
Loading...
