!
68
Meridian 3
3.2.2 DVI Cable
The input signals are applied to the display through DVI-D cable.
Length : 1.5 M +/- 50 mm
Connector type : DVI-D male with DDC-2B pin assignments
White connector thumb-operated jackscrews
With transplant pin protective cover.
Pin assignment:
Pin No.
Description
1 T.M.D.S. data2-
2 T.M.D.S. data2+
3 T.M.D.S. data2 shield
4 No Connect
5 No Connect
6 DDC clock
7 DDC data
8 No Connect
9 T.M.D.S. data1-
10 T.M.D.S. data1+
11 T.M.D.S. data1 shield
12 No Connect
13 No Connect
14 +5V Power
15 Ground (for +5V)
16 Hot plug detect
17 T.M.D.S. data0-
18 T.M.D.S. data0+
19 T.M.D.S. data0 shield
20 No Connect
21 No Connect
22 T.M.D.S clock shield
23 T.M.D.S. clock+
24 T.M.D.S. clock-
Timing requirement
Factory Preset mode definition:
1. Perfect FOS while presenting those timings.
2. Will specify those timing in User's Manual
Preset mode definition:
1. Need to support those timings.
2. Perfect FOS after auto adjustment.
User mode
1. Can save those timing that not in Preset mode and can be showed (not over scalar or Panel
spec.)
2. It needs to reserve the 10 timings space in memory size.
Mode storing capacity
Factory preset modes : 15
Preset modes : 41
User mode : 10
Factory preset modes (11 modes)
z Factory modes and preset modes are defined in the enclosed timing table file
ijĸĴņĴġŕŪŮŪůŨġŵŢţŭŦġ
ŭŪŴŵĮIJııĹIJĴįŹŭŴ
To Next Page
Loading...
