Philips 27E2F7901 - MultiView Feature FAQs

37
9.3 Multiview FAQs
Q1: Can I enlarge the PIP sub
window?
Ans.: Yes, there are 3 sizes to select:
[Small], [Middle], [Large]. You can
press to enter OSD menu.
Select your preferred [PIP Size]
option from the [PIP / PBP] main
menu.
Q2: 
How to listen to Audio,
independent of video?
Ans.: Normally the audio source is
linked to the main picture source.
If you want to change audio-
source input , you can press
to enter OSD menu. Select your
preferred [Audio Source] option
from the [Audio] main menu.
Please note that the next time
you turn on your display, the
display will by default select the
audio source you chose last time.
In case you want to change it
again, you need to go through the
above steps to select your new
preferred audio source, which
then will become the “default”
mode.
Q3: Whythesub-windowsflickers
whenIenablePIP/PBP.
Ans: It’s because the sub-windows
video source is interlace timing
(i-timing), please change sub-
window signal source to be
progressive timing (P-timing).