Philips 27E2F7901 - Setting Up Your Monitor; Installation Guide

5
2. Setting up the monitor
2.1 Installation
1
Package contents
*DP
VESA Bracket
*HDMI
AC/DC Adapter
Screw
M4 x 4
*USB C-C *USB C-A
*USB C-C/A
Quick start
Register your product and get support at www.philips.com/welcome
27E2F7901
Monitor
7000 Series
*Dierent according to region.
Note
Use only the AC/DC adapter model:
FSP180-AJBN3-T
2
Install the base
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
2. Hold the stand with both hands.
(1) Gently attach the base to the
stand.
(2) Use your ngers to tighten the
screw located at the bottom of
the base.
(3) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
1
2
3
3. After stand installation, hold the
stand with both hands, then lift the
monitor.