Philips 288P6 - Resolution & Preset Modes

19
4. Technical Specications
4.1 Resolution & Preset Modes
Maximum Resolution
 1920x1080@60Hz(analoginput)
 3840x2160@60Hz(digitalinput)
Recommended Resolution
 3840x2160@60Hz(digitalinput)
H. freq (kHz) Resolution V. freq (Hz)
31.47 720 x 400 70.09
31.47 640 x 480 59.94
35.00 640 x 480 66.67
37.86 640 x 480 72.81
37.50 640 x 480 75.00
37.88 800 x 600 60.32
46.88 800 x 600 75.00
48.36 1024 x 768 60.00
60.02 1024 x 768 75.03
44.77 1280x 720 59.86
63.89 1280 x 1024 60.02
79.98 1280 x 1024 75.03
55.94 1440 x 900 59.89
70.64 1440 x 900 74.98
65.29 1680 x 1050 59.95
67.50 1920 x 1080 60.00
74.56 1920 x 1200 59.89
66.64 2560 x 1080 59.98
88.79 2560 x 1440 59.95
67.50 3840 x 2160 30.00
133.32 3840 x 2160 60.00
Note
1. Please notice that your display works best at
native resolution of 3840 x 2160 @ 60Hz. For
best display quality, please follow this resolution
recommendation.
Recommended resolution
VGA/DVI-D: 1920x1080@60Hz
DVI-D dual-link: 3840x2160 @ 30Hz
DisplayPort: 3840x2160 @ 60Hz
MHL:1920x1080@60Hz
HDMI 2.0: 3840x2160@60Hz
2. The factory default setting DisplayPort v1.1
supports to the resolution 3840x2160 @ 30 Hz.
For optimized resolution 3840x2160 @ 60Hz,
please enter to OSD menu and change the
setting to DisplayPort v1.2, also please make
sure your graphic card supports DisplayPort
v1.2.
Setting path: [OSD] / [Setup] / [DisplayPort] /
[1.1, 1.2]
Auto
Language
OSD Settings
Setup
H. Position
V. Position
Phase
DisplayPort
1.1
1.2
Clock
Resolution Notification
Reset
Information
HDMI
3. HDMI 1.4/2.0 setting:
The factory default setting is at HDMI 1.4, which
supports most Blu-Ray/DVD players on the
market. You can change the setting to HDMI 2.0,
if your Blu-Ray/DVD player supports it.
Setting path: [OSD] / [Setup] / [HDMI] / [1.4,
2.0]
Auto
Language
OSD Settings
Setup
H. Position
V. Position
Phase
1.4
2.0
Clock
Resolution Notification
Reset
Information
HDMI
DisplayPort