To Next PageTo Next Page
Need help?Do you have a question about the Philips 29PT9111 and is the answer not in the manual?
General| Screen Size | 29 inches |
|---|---|
| Display Technology | CRT |
| Aspect Ratio | 4:3 |
| Sound System | Nicam Stereo |
| Teletext | Yes |
| CRT Type | Flat |
| Connectivity | SCART, RF |
| Power Consumption | 120 W |
| Sound Output | 2 x 10W RMS |
Initial setup steps for the TV, including ventilation and connections.
Instructions on how to power on the TV set from standby.
Guide to selecting the correct country for TV settings and reception.
Automatic process for searching and storing available TV channels.
Manual process for searching and storing specific TV channels.
Choosing the correct TV system (PAL, SECAM, NTSC) for optimal reception.
Step-by-step guide to searching for individual TV channels.
Assigning a unique number to a tuned TV channel for easy access.
Saving the tuned channel and its associated number into the TV's memory.
Reordering stored TV channels according to user preference for easier navigation.
Setting up various TV configuration options for connected peripheral equipment.
Adjusting surround sound modes like Pro Logic, Dolby 3 Stereo, and Hall.
Connecting and configuring an external audio amplifier for enhanced sound.
Controlling the display of channel or program information at the bottom of the screen.
Quickly closing all active menus using the MENU key for efficient navigation.
Instructions for powering the TV on and switching it to standby mode.
Methods for changing TV channels using the remote control or front panel buttons.
Controlling TV volume and temporarily muting the sound output.
How to open, navigate through, and close the TV's menu system.
Introduction to pre-defined and personal picture settings available on the TV.
Detailed steps for adjusting picture parameters like contrast, brightness, colour, and sharpness.
Choosing from pre-defined sound styles or setting personal audio preferences.
Adjusting volume, balance, and graphic equalizer settings for optimal audio output.
Setting a timer for the TV to automatically switch to standby after a specified period.
Adjusting Picture-in-Picture size and enabling/disabling the child lock feature.
Storing personal picture and sound settings for all TV channels simultaneously.
Creating, removing, and configuring display modes for personalized on-screen messages.
Configuring timers for automatic channel switching or TV standby at specific times.
Adjusting picture aspect ratio to display wide-screen content correctly.
Selecting between two audio languages or digital/analogue sound broadcasts.
Controlling the display of channel, program, or system information on the TV screen.
Switching PiP on/off and selecting input sources for the secondary PiP screen.
Explanation of the TV's teletext system and its advantages for information access.
Activating teletext and navigating through pages using digit keys or option lines.
Diagrams and steps for connecting a video recorder to the TV for optimal picture.
Connecting devices like CD-i/Photo CD players and other peripherals to the TV.
Reproducing audio/video signals via aerial cable, eurocable, or front AV connections.
Steps to record TV programs directly from the TV using a video recorder.
Recording from audio/video equipment connected to various TV input ports.
Solutions for common problems related to picture quality, sound output, and no image.
Troubleshooting remote control responsiveness and menu navigation problems.
Information on TV disposal and proper handling of exhausted batteries.
