2-2 Connections (Continued)
How to use external devices
Connecting antenna, cable/satellite/IPTV set-top box, Blu-ray Disc player, DVD player, or Game console etc.
Tip
Connect your external devices to your Philips TV before powering on.
• If connecting to an antenna via an RF cable
DTV programs that are broadcasted in your area can be received
for free through a digital antenna.
ININ
OUTOUT
RF cableR
F cableRF cable
CableCable
Antenna
• If connecting a set-top box via an HDMI cable
If the TV is connected to a cable or satellite set-top-box via an
HDMI cable, you must select the correct source by using
(SOURCE) on your remote.
HDMI
IN
R
F cableRF cable
Antenna
ININ
HDMI cable
OU
TOUT
• If connecting a Blu-ray Disc player, DVD player, or Game console etc.
HDMI is high quality audio and video connection. Connect Blu-ray Disc player,
DVD player or Game console etc.
Blu-ray Disc™/
DVD player
HD game console
or
ININ
HDMI cable
OU
TOUT
HDMI
Change input source
Select and change access to the attached devices such as Blu-ray player, gaming consoles, or cable box.
Tip
Check if the cable from your source device is properly connected into the socket and which input connector type it is
connected to.
1 Make sure both the TV and A/V device
(such as a Blu-ray Disc™ player) are powered on.
2 Press (SOURCE) and select the set-top box or the connected
device and wait a few seconds until the picture appears.
3 Plug in and turn on TV
Connect the AC power cord to the AC outlet. Press the power button on the TV’s remote control.
SOURCE
TV
|
Composite
|
HDMI 1
|
HDMI 2
To Next Page
Loading...
Need help?
General
