9
2.3 VESA Mounting
This monitor accepts a 75mm
VESA-Compliant mounting interface.
VESA Mounting Screw M4 (VESA
Mounting depth 7.0mm). Always contact
manufacturer for wall-mount installation.
75mm
2 screws (M4)
-5°
0° 90°
* Display design may dier from those
illustrated.
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that the
monitor does not tilt downward by
more than -5 degrees.
• Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
To Next Page
Loading...
