Philips 3000i Series - Cleaning the Surface of the Filter

16 EN
Cleaning the surface of the lter
Filter alert light status Action
The lter cleaning
alert displays on the
screen
Clean the surface of
the lter with a vacuum
cleaner
1 Switch o the air purier and unplug from the power socket�
2
3 4 5 6
2 Pull the back cover and remove it from the appliance�
3 Pull the lter from the appliance�
4 Clean the surface of the lter with a vacuum cleaner�
5 Put the lter back into the appliance�
6 Reattach the back cover�
7 Put the plug of the air purier in the power socket�
8 Touch the button to switch on the appliance�
9 Touch and hold the lter status check/reset button for 3 seconds to
reset the lter cleaning time�
10 Wash your hands thoroughly after cleaning the lter�